In the feed production process, about 60% of the feed materials need to be crushed（For example, the raw materials contain corn, soybeans and other grain particles）, and the crushing energy consumption accounts for more than 30% of the total power energy consumption of the whole plant. Therefore, if the crushing process can be optimized to improve the crushing efficiency, it will be reduced under the same energy consumption. Obtained very significant economic benefits. Crushing is one of the important processes in feed processing. On the one hand, it provides conditions for the subsequent ingredients, mixing and granulation processing; on the other hand, the crushing particle size of feed has a significant impact on feed digestibility and utilization, animal production performance and animal gastrointestinal health. The main factors affecting the crushing efficiency are the characteristics of raw materials, the fineness of crushing, and the configuration of crushing equipment and process. The grinder specially configured by our company for the animal feed production line is perfectly matched with our animal feed processing equipment, so that it can not only provide suitable fineness of raw materials for the feed processing production line, but also save electricity.

Features:

1. Adopt the progressive technological programs, well-designed;

2. Optimize the arrangement of knives, adjust the gap between knives and sifters.

3. Many precision testings to insure equipment running smoothly and reduce noise, optimal performance.

4.  Innovative low-power hammering process can enhance friction, thereby reducing required power and increasing output by 25%

5. Movable and opened operation door, new modal of sifter install tool, makes the operation humanistic and convenient.

Model used for small feed production line:

Technical Parameters:

Model	WF-30	WF-40	WF-50	WF-60	WF-80
Installed Power	5.5kw	7.5kw	20.5kw	36kw	52kw
Capacity	100-300kg/h	200-400kg/h	300-600kg/h	400-800kg/h	600-1500kg/h
Dimension	4500×1100×2800mm	5000×1400×2800mm	5500×1800×3000mm	6000×1800×3000mm	7000×2500×3300mm

Model used for large feed production line:

Technical Parameters:

Model	Installed Power	Capacity	Dimension
SF40	37kw	2-5ton/h	1600×950×1100mm
SF60	55kw	3-8ton/h	2100×1000×1200mm